Questions for you:

Are you running NTFS or fat32?
What is sp6?
What Dx? are you using?
What video card?
Do you have a scsi cd-rom?
What sound card?

I have experience with NT4.0 but these questions I need answered In order to help
Hope you don't mind

Are you running NTFS or fat32?
What is sp6?
What Dx? are you using?
What video card?
Do you have a scsi cd-rom?
What sound card?

BlackIce,
I am running NTFS

sp6 = Service Pack 6

How can I find out which Dx I am using?

Video Card = Matrix Graphics Millennium G250 AGP Versions: 4.00, 4.0.66 Bios Version: v2.5.019 8MB

I do not have a Scsi cd-rom

Sound Card = SoundFusion MP401?

My daughter and myself are of to shop so it will be a bit before i can answer you correctly.

In the mean time I have a NTFS to Fat32 patch converter
just for gamming it may help we will chat about that later.

Dx should be listed in your computer so run a find program to locate it it will tell you if you have it.

I believe you need at least dx7.0 to run Ctp2
I will check my resources to see if they have an online patch you can install from the net, an example would be a patch to run diablo2 in nt it is restricted to DirectX 3 support but hey it works

This would appear to be the short answer.I will read more about this NTFS to FAT32 patch later and get back to you on it's abilities.

This utility allows you to Read and Write on a FAT32 partition within your Fat16 or NTFS partition.
This will not partion your drive.It is just a temp patch.

Here is a no cd patch for the game go here maybe try it? http://www.gamecopyworld.com/

The patch for ntfs to fat32 is a large file do you want it? if so do you have a ftp client? As you can then get it off my server.

Or you can run a duel boot and load win98 that is the obvious and final solution. Or upgrade to 5.0?

This is all i have so far as i am a reseach pig
If you give me more time i will dig up more info in fact i just found a site that offers ntfs for win98 humm will be reading that later

Hope i helped stay in touch.

blackice

Follow the link and download. Install it. http://msdn.microsoft.com/compatibility/

Then go in Start Menu. Run QFixApps. Browse to the game you want to run. Then in the lower box, choose "Win95verLie" Click Run.

Secondly, if you want to run it again and again, you dont have to do all this again. simply click advanced then click "create attribe file...".Make sure Browse has the file you need and "Win95VerLie" is selected.

When it tells you the file is created. Go to C:\Winnt\AppPatch\ and run the reg file of the game. That is it! You can run the game from anywhere.

Here is a neat ntcompatible bbs
http://www.ntcompatible.com/cgi-bin/ubbcgi/ultimatebb.cgi?ubb=forum&f=1

[http://support.microsoft.com/support/kb/articles/q197/2/98.asp

This update has the new C-Run-time Library DLL, Msvcrt.dll. which resolves the heap compatibility problems described in the following Microsoft Knowledge base articles:

Q190536 PRB: Invalid Page Fault in Msvcrt.dll

Q194550 PRB: Freeing Memory Multiple Times May Cause an Access Violation

The cause of the compatibility problems was a change in the internal layout of the way that the C Run-Time library allocates memory. No application should be dependant on this layout, but due to the issues in the previously mentioned articles, they are unknowingly affected by the new heap manager. The new Msvcrt.dll file implements two heap managers, the Visual C++ 5 compatible heap manager and the Visual C++ 6 compatible heap manager. It detects with which Visual C++ version your application is built and uses the appropriate heap manager for that application. If this version is 6.0 or greater, the Visual C++ 6 compatible heap manager is used and if it is earlier than version 6.0,the Visual C++ 5 compatible heap is used.]

The problem for me was that the Library Update never actually installed the new file (which you would find in the system32 directory). Same with Libraries Update 2.0, which was just released. It may be because some service was using an existing version of the file, and
would not let go. I could not even use the older version on the CTP CD because NT complained

that the "file was in use" and would not let me do a thing with Msvcrt. And it's not like

Windows 95 where you can just boot to DOS and change any files you need to. What to do?

Microsoft pointed me to a utility that will let you change locked files. Eureka!

Here it is (instructions on the link): http://www.microsoft.com/technet/inside/6-7-99.htm#inuse

Worked like a charm. Has it fixed the problem? Don't know yet... but at least I can now mess around with different versions of Msvcrt.dll to try and get some stability.

5.00.7022 What CTP uses per my CD
6.00.8337 What's in Windows Update per the article (but it won't install for me)
6.00.8397.0 What Sonique uses. (the latest version I've seen.) You can get this MP3

player which includes the file we need at www.sonique.com

Hope this gives you some more ammunition to isolate any problems you're having. I'd like to get it to the point where I can actually spend more time playing than troubleshooting.

Let me know of any successes/failures.

Good Luck.

R.